Heat resistance and …
Impregnating lacquers are used when the motor parts are fixedImpregless®︎
Impregnating lacquers are used when the motor parts are fixed, but there are many problems in the pollution factory environment of VOC and the waste time of the post heating treatment engineering. The Impregless B series is capable of coating the enameled wire on the B project to achieve no solvent and low molecular weight components. Moreover, the fixed time can be shortened by ohmic heating.
Impregless-R is a motor driven by refrigerants. It prevents the eluent from blocking the oil sludge in the capillary.
Characteristics:
1, refrigerant resistance with conventional fusion materials is difficult.
2. Heated by electricity, it will be fixed for a very short time.
3, the friction coefficient is very small, and the insertion resistance to the stator is very small.
4, evaporation without solvent and low molecular weight components will result in low VOC.
Use:
Air conditioning, refrigerator compressor motor and so on.
Performance:
1, not only R22 (R410A), but also ester oil, ether oil and mineral oil.
2, NEMA extraction test less than 0.05%. R22 was impregnated at 160 C and heated to BDV_12kV.
It can be fixed at 3, 180 degrees and 10 minutes.
4. The coefficient of static friction is 0.07.
The characteristics of the application of refrigerant
Good sliding
The life of the product is longer
Excellent refrigerant resistance
The construction of compressor and compressor motor
Circulating refrigerating oil and refrigerant mixture in the compressor.
Test results of refrigerated oil
1.the sludge in a copper pipe that will not clog the fusion layer
2.Pressure abnormality without compressor
Partners and end customers